DRI-AIR Lube System: Model DL3AM
$1,585.00
Model DL3AM:
– Single 1 inch Air Inlet
– 3 Discharge Ports.
– Automatically Ejects Accumulated Water & Dirt
Air Compressors force feed large quantities of air into very small spaces. This compression process creates heated compressed air which contains moisture. As the compressed air travels through the air-lines, it cools and water droplets are allowed to form. When this air/water mixture enters the Du-Lite DRI-AIR Lube System: Model DL3AM the air is forced to travel through a baffle. As this mixture travels through the baffle the water is displaced and falls to the bottom of the Du-Lite DRI-AIR Lube System. When enough water and dirt has been collected it automatically ejects to the ground or an available drain. The dry air then enters the lubricator and mixes with Du-Lite’s variety of rust preventative oils, and is sent through to the air tool.
If it Runs on Air it Needs to be Lubricated
PLEASE SEE IMPORTANT SHIPPING INFO BELOW
- Description
- Additional information
- Reviews (0)
Description
How it works:
Air Compressors force feed large quantities of air into very small spaces. This compression process creates heated compressed air which contains moisture. As the compressed air travels through the airlines, it cools and water droplets are allowed to form. When this air/water mixture enters the Du-Lite DRI-AIR Lube System the air is forced to travel through a baffle. As this mixture travels through the baffle the water is displaced and falls to the bottom of the Du-Lite DRI-AIR Lube System. When enough water and dirt has been collected it automatically ejects to the ground or an available drain. The dry air then enters the lubricator and mixes with Du-Lite’s variety of rust preventative oils and air tool lubricants, and is sent through to the air tool.
There are no filters or any other accessories or parts needed to maintain the Du-Lite DRI-AIR Lube System. The dryer is also maintenance free, and the lubricator only needs oil added to the reservoir as necessary. The Du-Lite DRI-AIR Lube System will extend the life of your air tools, increase tool performance, and cut the costly wasted man-hours caused by the poor performance due to the lack of lubrication or the clogging of foreign substances in your air tools.
The use of the Du-Lite DRI-AIR Lube System eliminates these types of problems from occurring and allows you to finish your projects in a timely manner.
If it Runs on Air it Needs to be Lubricated
- An automatic float valve ejects the accumulated water and dirt
- Maintenance free – No filters or parts to replace or service
- Tools that run on air must have clean, water-free air-lines and lubricating oils to operate properly.
- Water-free lines that are properly lubricated enhance performance, increase horsepower and the oil coating the internal parts prevent rusting and part breakage.
- Use Du-Lite’s Frost-Free and DBE (directional boring equipment oil) to eliminate the possibility of polluting your work site.
- Du-Lite manufactures units with both 3 and 6 ports
Du-Lite Manufactures and Sells 4 Different Air -Tool Lubricants:
- Du-Lite’s Frost-Free Air Tool Lubricant – Non-Toxic Environmentally Friendly
- Du-Lite’s DBE Lubricant (Directional Boring Equipment Oil) – Non-Toxic Environmentally Friendly
- Du-Lite/New-Matic Air Tool Lubricant
- Du-Lite’s Premium Rock Drill Oil (Offered in Winter and Summer Blend)
Chemicals not included
Additional information
Weight | 45 lbs |
---|---|
Dimensions | 33 × 10 × 13.5 in |
Be the first to review “DRI-AIR Lube System: Model DL3AM”
You must be logged in to post a review.
Reviews
There are no reviews yet.